Agosto 2016

CUCHILLO RETIRADO DE COLECCIÓN PRIVADA
* Origen: Retirado de una colección privada, comprado anteriormente
* Estado: Como nuevo
* Disponible comercialmente: Descatalogado, sólo 30 piezas fabricadas
* Afilado: De fábrica
* Marcas en la hoja: Ninguna
* Marcas en la empuñadura: Ninguna
* Caja: Presente
* Funda: Presente
* Manuales, Certificados y Garantías: Presente
* Comprobada y certificada por nuestro laboratorio interno

Uso: táctico, deportivo, senderismo, coleccionismo

Hoja: integral, acero inoxidable japonés laminado (San Mai) con filo CoS endurecido criogénicamente 61.5HRC
Mango: forprene
Longitud de la hoja: 90mm.
Grosor de la hoja: 6,5 mm.
Longitud total: 210mm.
Equilibrio: retranqueado 0.5cm. de la rama de guarda
Peso: 214g.
Funda: ABS con enganche Tek-Lok multiposición
Notas: cuchillo nuevo, tomado de colección privada

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 1095
Trattamento Lama: Textured powder coat
Manicatura: micarta verde
Lunghezza lama: 65mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 158mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 58g.
Chiusura: -
Clip: -
Fodero: ABS, da collo o con clip aggiuntiva per porto alla cintura
Confezione: Busta plastica trasparente
Note: Kit con paracord + accessori per fodero

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Para esta nueva colaboración con Extrema Ratio, decidimos proponer un éxito de ventas en el mundo de la cuchillería, el modelo de metralla. Es una versión de tarjeta raso, pero lo más importante es que se ha utilizado, por primera vez en Italia, el famoso acero japones San Mai producido por Takefu acero. En concreto, se utilizó la CoS (cobalto especiales, considerado mecánicamente superiores en un 25% con respecto al VG10 Ya apreciado) para la placa central y la 420J2 (HRC 55) de las dos placas laterales, con el fin de tener una alta capacidad de corte, pero al mismo tiempo en la resistencia notable y la resistencia a la oxidación.

Una primera producción de 30 piezas se ha hecho.

SHRAPNEL OG es un muy versátil "copia de seguridad" cuchillo de combate con cualidades notables. Su hoja en forma de hoja es una superficie plana en un ángulo característicamente baja a un borde ancho, extraordinariamente agudo. La vaina duro incluido puede ser usado en vertical, horizontal u oblicuamente (en un ángulo de 45 °). A diferencia del modelo antiguo reemplaza, el diseño de la empuñadura SHRAPNEL OG no incluye un guardia.

Hoja: completa , de acero inoxidable laminado en japonés ( San Mai ) con CoS afilados a 61,7HRC en temple criogénico
Mango: forprene
Longitud de la hoja : 90 mm .
Grosor de la hoja : 6,5 mm .
Longitud total : 210 mm .
Equilibrio : de nuevo a 0,5 cm . por rama de guardia
Peso : 214 g .
Funda: ABS con Tek - Lok ataque múltiple
Notas: caja de cartón con logotipos Extremaratio y certificado

Clad metal
Es un metal compuesto o en parte totalmente unidas por difusión juntos de diferentes tipos de metales.

composición metálica muestra un mayor rendimiento Qué respectivos materiales por sí solos no poseen y el rendimiento complementa características opuestas de cada material, es decir, "características de la mezcla"

Clad Efecto sobre cuberterías

Tenacidad
Al igual que las espadas japonesas, revestido de metal es difícil de romper o doblar, gracias a la tenacidad como la pieza de acero duro está revestido con aceros suaves.
Fácil de trabajar en
cladded estructura es fácil de aplicar en obras tales como la forja, moler, afilar o pulir para hacer una hoja afilada.

Resistencia a la corrosión mejorada
combinación adecuada de material genera diferencia de potencial eléctrico y se mejora la resistencia a la corrosión en el borde de la cuchilla.

Mejor y más larga duración nitidez
Después de la forja de acero de presión hace que la más densa estructura microscópica y mejora la nitidez y asegura un rendimiento de larga duración.

Ahorro de recursos
Como acero de alta clase se utiliza sólo para la parte necesaria, está perfectamente rentable ..

Fácil corrección de la distorsión
A medida que el acero está unido con materiales de acero suave, su hoja es difícil de romper y la corrección de la distorsión es fácil.

Fácil de perforación y soldadura después del tratamiento térmico
Aunque el acero se hace más difícil después del tratamiento térmico, el acero suave nunca pierde su suavidad, lo que permite que el material se perfora o soldada.

Mejora del diseño
patrones laminados o patrones aparecen de forma Damasco Qué materiales se unen con diferentes tipos de metales.

Il Jumbo è molto più di un pratico zaino monospalla. 

Il compartimento primario ha un'enorme capacità, ed è dotato di chiusure resistenti all'acqua. Ha inoltre molteplici ancoraggi esterni che permettono di ampliare il tutto con tasche ed accessori modulari opzionali.

• Patta di protezione con fibbia, tasche con cerniera
• Anelli elastici interni si adattano quattro riviste di pistola. Tasca laterale guaina adatta due riviste 30rnd M4 / M16 o la radio. A scomparsa tasca con zip per fondine
• Tracolla con antiscivolo imbottita rimovibile, grande fibbia, MOLLE
• Schienale imbottito per un maggiore comfort. Maniglia di sostegno durevole. DuPont Teflon fabric protector. Paracord tira zip. Lato

- Scomparto principale: misura 23 x 20 x 7,5cm, possiede pareti divisorie per un migliore utilizzo dello spazio interno. Alla base é situato un foro di drenaggio
- Scomparto anteriore: misura 18 x 16,5 x 4cm con divisori in rete elastica e cinghie elastiche 
- Due tasche laterali: una con chiusura a doppia cerniera e tre serie di PALS, e l´altra del diametro di 9cm e l´altezza di 18cm ideale per una bottiglia Nalgene da 0,9 lt
- Il coperchio della tasca ha una maniglia in tessuto sulla parte superiore
- Vano posteriore per caricatori CCW con un pannello uncinato 18 x 20cm per ganci ad anello
- Tracolla: Integral 2 con sgancio rapido (la lunghezza della cinghia va da un minimo di 84cm a un massimo di 1,4m
- Imbottitura antiscivolo di alta qualità
- Molteplici punti di attacco PALS e un pannello uncinato per la targhetta identificatrice 
- Cintura alla vita regolabile e riponibile di circa 2cm di altezza, girovita massimo di circa 1,2m
- Realizzata in resistente tessuto di nylon 800 denari rivestito in PU per la riduzione del peso di circa il 15%

Modello per mancini

Il FatBoy è molto più di un pratico zaino monospalla. E' lo stato dell'arte degli accessori e provvede ad un sicuro contenimento di tutti gli accessori e ad una rapida accessibilità all'equipaggiamento di uso quotidiano.

Il compartimento primario ha un'enorme capacità di 156 cu. in. ed è dotato di chiusure resistenti all'acqua. Ha inoltre molteplici ancoraggi esterni che permettono di ampliare il tutto con tasche ed accessori modulari opzionali.

Ogni FatBoy è accompagnato da un comodo spallaccio regolabile antiscivolo per garantire il massimo confort durante l'uso prolungato.

* Scomparto Principale: 6.5" (L) x 3" (W) x 8" (H)
* Tasca Frontale: 5" (L) x 1.5" (W) x 7" (H)
* Scomparto Posteriore: 8" (L) x 7.5" (W)
* Lato A (tasca con 2 file di attacchi): 3" (L) x 1.5" (W) x 6" (H)
* Lato B (fodero): 1.5" (L) x 1" (W) x 5" (H);
* Lato C (tasca per cellulare): 2.5" (L) x 1" (W) x 4" (H) con due portapenne
* Spallaccio : strap integrali da 2" antiscivolo.

Verwendungszweck: Jagd

Art der Produktion: Industrie
Blattproduktion : Norwegen
Blade: 12C27 Edelstahl 59HRC
Blade-Behandlung: -
manicatura: Cocoboloholz
Klingenlänge : 85mm.
Blattstärke : 3mm.
Länge geschlossen: 115
Gesamtlänge : 200 mm.
dick, wenn sie geschlossen: 1,8 cm
Gewicht: 117g.
Schließen: Hinterlegschloss
Clip: -
Scheide: Braunes Leder
Verpackung: zylindrische Karton mehr Tuch aus Baumwolle der Marke Helle
Hinweise: -

Uso previsto: Deportes

Tipo de producción: Industrial
cuchilla de la producción EE.UU.
acero al carbono 1095: Lámina
el tratamiento de la hoja: textura capa de polvo de color canela
Longitud de la hoja: 55 mm.
Grosor de la hoja: 3 mm.
Longitud cerrada: -
Longitud total: 130 mm.
De grosor cuando está cerrado: -
Equilibrio: -
Peso: 40 g.
Cerrado: -
Clip: -
Funda: ABS y Cordura
Embalaje: bolsa de plástico transparente

Hoja: Acero al carbono
Conformación: Hoja plana
Kauri: Descubierto
Aunlo-Bal: línea negra grabada
Manicura: Cuerno negro de búfalo pulido y grabado
Acabados: Latón
Longitud de la hoja: 260 mm.
Grosor de la hoja: 9 mm.
Longitud total: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Peso: 490g.
Funda: cuero y madera
Notas: Cuchillo original nepalí hecho totalmente a mano